WPC Deking Flooring - InnvoBuild

New WPC Deking Flooring - Carved (IB61-HT-Surface)

These are Amalgam materials and generally have a composition of wood dust & Fibre in addition to thermoplastic materials such as Polypropylene, Polyethylene along with additives & different pigments as colorants. They are preferred for furnishing exterior & interiors walls & flooring outdoors due to their excellent qualities such as fade and stain resistance, higher thermal & abrasion resistance, and excellent resistance to termites as well as resistant to UV. They offer a rich and appealing look the places they are installed.

New CE test:

With prEN 15534-4:2012 for decking profiles

Slip resistance:

Boards of INNVOBUILD is according to ASTM D2394-05. This is the best ranking for bare-foot slip resistance.

Weathering Resistance:

Boards of INNVPBUILD have very low moisture uptake. This is a key for mould & mildew resistance.

UV resistance:

4000 hours accelerated Xenon-arc Exposure, the Boards turned slightly more clear and coloured.

Abrasion resistance:

The resistance to abrasion is similar to Oak.

Fungus Resistance:

Whatever fungus the wood composite is exposed to, it is extremely durable. Moreover, aging test does not affect this durability.

ENQUIRE NOW

Item of Test	Values
Flexural strength (MOR) ASTM D7031-04 Section 5.5 & ASTM D6109-05 Method A	21.5Mpa
Flexural modulus ASTM D7031-04 Section 5.5 & ASTM D6109-05 Method A	3510Mpa
Flexural strength (MOR) & freeze-thaw resistance ASTM D7031-04 Section 5.2 & ASTM D6109-05 Method A	21.2Mpa
Flexural modulus after freeze-thaw resistance ASTM D7031-04 Section 5.2 & ASTM D6109-05 Method A	3310Mpa
Impact Resistance ASTM D7031-04 Section 5.12 & ASTM D4495-00 (2005)	26J
Specific gravity ASTM D7031-04 Section 5.14 & ASTM D792-08 Method B	1.336g/cm3
Water absorption ASTM D7031-04 Section 5.19 & ASTM D1037-06a Section 23 Method B	0.72%
Moisture content ASTM D7031-04 Section 5.15 & ASTM D4442-07 Method B	1.08%
Abrasion Test ASTM D7031-04 Section 5.17 & ASTM D4060-10	Wear index: 101 mg
Static coefficient of Friction ASTM D2394-05	0.43
Sliding coefficient of Friction ASTM D2394-05	0.25

NO	Property Item	Wood	Plastic	WPS
1	Righdity And Compressive Capacity	High	Low	Higher than Wood & Plastic
2	Processibility	Easy	Difficult	Easy
3	Reprocess Capacity	Yes	No	Yes
4	Durability	Ordinary	Long	Long
5	Aniti - Sun Ageing Resistance	Good	Bad	Good
6	Frequency of Maintanance	Often	Seldom	Seldom
7	Corrosion Property	Bad	Good	Good
8	Recuperbility	No	Yes	Yes

All information mentioned above is based on typical sample, is accurate to the best of our knowledge, and is provided without liability or commitment. As INNVOBUILD has no control over which other use this material, it does not give guarantee that the same results are obtained, as mentioned here. Each user of material should make their own test in their own local condition to confirm the suitability of our product for their particular use. Technical Specifications are subject to change.

Decking